Compared with conventional pressurized module at 30 mg/l SS feeding limitation, Supratec HP series can be used up to 1000mg/L SS feeding water or wastewater application without any fiber broken issue. Further, HP series will automatically reduce around 50% concentrated liquid discharge volume, which will greatly benefit for higher water recovery rate and much lower post processing cost. At the same time, this large-scale membrane module and integrated design are easy to install and footprint saving. It can be widely used in municipal sewage, industrial wastewater, water reuse, seawater desalination, drinking water treatment and other fields. Distinguished from most of other pressurized module players using non-supported fibers which is easy to be broken from fluctuated feeding quality. Supratec HP series for pressurized UF, innovatively utilizes supported PVDF hollow fiber membrane. This supported UF hollow fiber is produced in German 4.0 industry mode, with higher strength, higher flux, longer lifetime, easier to be clean features. The HP series modules are assembled by Supratec manufacturing base in Hungary. This unique single side potting structure, dramatically improves the air cleaning efficiency, higher recovery rate, operation at high solids loading with reduced cleaning frequency, solids deeply drained by gravity. Based on double-layer sealing structure, a European standard centrifugal potting process of HP series module ensures a stable and reliable quality.