The Supratec Ultrafiltration membrane is a new design of supported hollow fiber membrane. Supratec is the membrane supplier with more than 50 years of experience in the field of wastewater treatment and is located in Germany. Supratec membranes sophisticated production system in Germany are tailor made by ourown innovative team with highest precision and full automation in German Industry 4.0 mode. Supratec Membrane GmbH is the designer and membrane manufacturer with more than 30 years of experience in the field of membrane R&D and manufacturing. Supratec UF membranes with PVDF material are produced based on a nominal pore size of 0.03 μm, with narrow pore size distribution, extremely high porosity, unbreakable strength (>600N). As a perfect barrier to filtrate biomass and bacteria without fouling issue, Supratec UF membranes has nearly no flux decline within more than 10 years life-time as a trouble free MBR membrane, which is clearly distinguished from conventional MF membrane. Supratec UF membrane, not only greatly guarantees the effluent water quality, but also remove most of virus including the coronavirus from the biological safety viewpoint.

With more than 1,000 application cases all over the world in last 20 years, MicroClear flat sheet modules own a customer satisfied reputation for its German top quality membrane. Each MicroClear module is welded via patented solution between polypropylene (PP) support plate and UF mem-brane. Unique support body design and welding form have good mechanical strength and stability. The innovative design allows the membrane modules to be assembled by stacking each other to adapt to various tank designs, and many different cassette types can be provided for selection.

Compared with conventional pressurized module at 30 mg/l SS feeding limitation, Supratec HP series can be used up to 1000mg/L SS feeding water or wastewater application without any fiber broken issue. Further, HP series will automatically reduce around 50% concentrated liquid discharge volume, which will greatly benefit for higher water recovery rate and much lower post processing cost. At the same time, this large-scale membrane module and integrated design are easy to install and footprint saving. It can be widely used in municipal sewage, industrial wastewater, water reuse, seawater desalination, drinking water treatment and other fields. Distinguished from most of other pressurized module players using non-supported fibers which is easy to be broken from fluctuated feeding quality. Supratec HP series for pressurized UF, innovatively utilizes supported PVDF hollow fiber membrane. This supported UF hollow fiber is produced in German 4.0 industry mode, with higher strength, higher flux, longer lifetime, easier to be clean features. The HP series modules are assembled by Supratec manufacturing base in Hungary. This unique single side potting structure, dramatically improves the air cleaning efficiency, higher recovery rate, operation at high solids loading with reduced cleaning frequency, solids deeply drained by gravity. Based on double-layer sealing structure, a European standard centrifugal potting process of HP series module ensures a stable and reliable quality.